19
Parameters /
AN Expert Editor Main Window
■
Setting and Changing Parameter Values ...................
• For panel knobs:
Left-click on the knob and drag horizontally or vertically as desired. Dragging to the left
or down decreases the value, and dragging right or up increases it. The knob “rotates” as
you drag it, and the parameter value (shown just above each knob) changes accordingly.
Any parameter changes are output as MIDI data, both to the PLG150-AN and the host
application (for recording).
Operation of the knobs can also be set so that moving the mouse in a circular direction
— as if you were actually rotating the knob — changes the parameter value. (See
.)
• The panel knob operation can be changed to let you “rotate” the knob, instead of moving it
horizontally or vertically. (See the
• For buttons:
Simply left-click on the desired button to turn on/off or to select the appropriate setting.
On/off buttons (such as
) have virtual “lamps” that light when the function is on.
• Combo boxes
For combo boxes (such as Control Source in the
), click the
down arrow to expand the box, then highlight the desired setting.
• DATA DEC (Decrease) and INC (Increase) buttons
Click on the desired parameter, then click either of these buttons to decrease the value/
setting (DEC) or increase it (INC). These buttons in some cases (e.g.,
be used to select values/settings that are not available otherwise>
