Yamaha PJP-50USB, User Manual

Page: 17 / 22

15
C
O
NF
IGURA
T
ION
This unit automatically tracks the talker's voice. The
talker's voice can be picked up with very narrow
directivity so that background noise can be significantly
reduced. The voice of only one talker can be picked up at a
time.
While the "Mic Area" screen is being displayed, press a
numeric key to specify the area in which the tracking
function is disabled. Each time you press the numeric key,
the tracking function is enabled or disabled in the
direction as shown below.
y
• Pressing the numeric key (5) enables the tracking
function in the all areas.
•
You can select multiple areas at the same time.
Select [Menu] - [Settings] - [Mic Area].
Configure the acoustic echo cancellation setting
depending on your operating environment. Normally, you
do not need to change it from "Low" (default).
•
Low (default): Select this setting when this unit is used
in an ordinary conference room, open space, or office.
The communication quality is most stable in this
setting.
•
Mid : Select this setting if echo is produced at the other
party when this unit is used in "Low". This setting is
suited for use in a room with high reverberations.
•
High : Select this setting if echo is still produced at the
other party when this unit is used in "Mid".
"Mid" and "High" can improve the echo processing capability but
lowers the communication quality. These settings should be
selected only when echo is produced at the other party.
Select [Menu] - [Settings] - [AEC Effect].
When you connect this unit using commercially available
audio connection cables, adjust the audio input level
(amplification) in the range of -12.0 to +12.0 dB.
Select [Menu] - [Settings] - [AUDIO IN LEVEL].
When you connect this unit using commercially available
audio connection cables, adjust the audio output level
(amplification) in the range of -12.0 to +12.0 dB.
Select [Menu] - [Settings] - [AUDIO OUT LEVEL].
Select "Enable" to use this unit as a telephony device. The
default setting is "Disable".
Select [Menu] - [Settings] - [Telephony].
Setting Menu List
Selecting the audio pickup area
(Mic Area)
MIC MUTE
VOL
4
7 0
8
5
2
6
3
9
#
1
MENU
ENTER
CLEAR
STANDBY
MIC MUTE
VOL
4
7 0
8
5
2
6
3
9
#
1
MENU
ENTER
CLEAR
STANDBY
Tracking the talker's
direction automatically
Today...
Next...
MIC MUTE
VOL
4
7 0
8
5
2
6
3
9
#
1
MENU
ENTER
CLEAR
STANDBY
1
2
3
6
9
8
7
4
Configuring the acoustic echo
cancellation setting (AEC Effect)
Note
Changing the audio input level
Changing the audio output level
Using this unit as a telephony
device (Telephony)