Yamaha PianoCraft MCR-E810, Owner'S Manual

Page: 45 / 277

43
En
Eng
lish
O
T
HE
R
OP
ERA
T
IO
NS
The receiver is equipped with 2 types of timer functions: clock timer and sleep timer. The clock timer automatically turns
the receiver on or sets it to the standby mode at the specified time. The sleep timer sets the receiver to the standby mode
after the specified time elapses. The DVD player also turns on or sets to the standby mode automatically if it is connected
to the receiver using a system control connection (see page 12).
The clock timer automatically turns the receiver on or sets
it to the standby mode at the specified time. You can also
specify an input which the receiver automatically selects
when the clock timer turns it on.
• You cannot set the clock timer unless you adjust the clock (see
page 19).
• If you do not touch any key for more than 30 seconds after the
previous key operation, the operations you made are cleared
from the memory and the normal display reappears.
1
Press DISPLAY on the front panel of the
receiver repeatedly to select “Timer Input”.
The TIMER indicator flashes in the front panel
display.
2
Rotate INPUT to select an input which the
receiver automatically selects when the clock
timer turns it on.
If you select “TUNER”, you can select a band by
pressing PRESET/BAND. To select a preset station,
carry out steps 2 and 3 in the “Selecting preset
stations” procedure (see page 39).
3
Press DISPLAY again to select “ON Time”.
4
Specify the time when you want to turn on
the receiver.
Carry out the steps 3 and 4 in “Step 2: Adjust the
clock” (see page 19) to adjust the hour and minute
settings.
5
Press DISPLAY again to select “OFF Time”,
and then specify the time when you want to
turn off the receiver as well as step 4.
6
To turn off the receiver now with the clock
timer set, press TIMER.
TIMER LED lights up. The receiver will be turned on
or set to the standby mode automatically at the
specified time.
y
If you want to turn off the receiver by “OFF Time”, press
DISPLAY repeatedly to display the clock in the front panel
display, and then press TIMER. The TIMER indicator lights
up in the front panel display.
To set or cancel the clock timer
Press TIMER on the front panel while the clock is
displayed or the receiver is in the standby mode.
Setting the Timer
Setting the clock timer
Notes
MIN MAX
VOLUME
INPUT
BALANCE
L R
TREBLE BASS
PHONES
STANDBY/ON
TIMER
DISPLAY MEMORY
NATURAL SOUND STEREO RECEIVER RX-E810
PRESET/BAND PRESET/TUNING
PURE DIRECT
HOUR TIMER TIME ADJ MIN
AUTO/MAN'L
PRESET/BAND
TIMER LED
DISPLAY
TIMER
INPUT