Yamaha PF-500, Owner'S Manual

Page: 39 / 108

PF-500
39
Recording Your Performance
Ending methods:
Replace – The data after the point you stop recording will also be
erased.
Punch Out — The data after the point you stop recording will remain.
If you cancel recording by
pressing the [REC] button,
recording stops when you
press the button. If you can-
cel recording by pressing
the [TOP] button, the PF-
500 locates the top of the
song.
3-2
Keep holding down the [REC] button and press the
[TRACK 1] button.
The [TRACK 1] indicator flashes in red.
(To stop recording, press the [REC] button again or press the [TOP]
button.)
Follow the procedure beginning with Step 4 on page 36.
Recording to [TRACK2]
This section explains how to record another part on the second track.
Procedure
1.
Select a voice.
Select a voice (or voices) for recording.
Repeat Step 2 on page 36.
Pressing the [TRACK 1] but-
ton repeatedly toggles
between playback on (the
indicator lights up in green)
and off (the indicator turns
off).
2.
Enter record mode and select a recording track.
Press and hold down the [REC] button and press the
[TRACK 2] button.
The [TRACK 2] indicator flashes in red. (To cancel recording, press
the [REC] or [TOP] button.)
Make the recording by following the procedure beginning with Step 4 on page 36.
You can record a new part while listening to playback of the recorded [TRACK 1] data.
TIP
SONG KEYBOARD
GRAND
PIANO 1
CHURCH
ORGAN
E.PIANO
1
STRINGS
E.PIANO
2
CHOIR
GRAND
PIANO 2
JAZZ
ORGAN
HARPSI-
CHORD
SYNTH.
PAD
VIBRA-
PHONE
E.BASS XG
GUITAR
E.CLAVI-
CHORD
WOOD
BASS
SONG SELECT
NEW SONG
SONG
SETTING
FILE
TRACK
1
TOP
TRACK
2
START/STOP
EXTRA
TRACKS
REC
UP DOWN
SETTING START/STOP
METRONOME
D
B
C
A
EXIT EXIT
CONTRAST VOICE
SETTING SPLIT
VARIATION BRIGHT MELLOW
BRILLIANCE
MIDI
SETTING
OTHER
SETTING
REVERB CHORUS
DEMO TEMPO SONG BALANCE MASTER VOLUME
NO YES
VOICE
SYNCHRO START
SONG
MAX MIN
EFFECT
1
2
TIP