5.3. MATRIX/ROUTER page
This page shows a list of the input signals being routed via the MATRIX and ROUTER to each channel.
①
Input source list
Analog inputs are shown as A1–A4, and Dante inputs are shown as D1–D16.
Use the channel select keys to select the channel that you want to operate, and then press the main knob to
access the
.
5.4. DEVICE MUTE page
In this page you can set and view the mute status of the entire amp.
①
ON/OFF
If this is on, the entire amp is muted. You can press the main knob to specify the mute status in the screen that
appears.
5.5. VOLUME page
In this page you can set and view volume-related information.
①
Volume
This sets and shows the volume.
Use the channel select keys to select the channel that you want to operate, and then turn the main knob to
change the volume.
If you select multiple channels, the channels will be linked, and you can change the volume while maintaining the
difference between the channels.
5. Panel operations
22
| PC412-D PC412-DI PC406-D PC406-DI Owner’s Manual
