Recording Your Performance
P-155
Owner’s Manual
ENGLISH
28
Recording to RIGHT/LEFT
This lets you record the right and left parts separately. Since you can record the left part while play-
ing back the right, this is useful for independently recording both parts of a duet.
1.
Make all the initial settings.
Same as step
1
in “Recording a performance quickly” on page 25.
2.
Select a file (U01–U03) to record.
Press the
[SONG SELECT]
button so that the “USER” indicator lights then press
the
[–/NO][+/YES]
buttons to select a file for recording.
CAUTION
To avoid erasing previously recorded song(s):
If the file contains data, the part indicator lights up green when you select a file.
Note that recording new data on this part will erase the existing data.
3.
Engage the Record Ready mode.
Press the
[REC]
button and press the
[RIGHT]/[LEFT]
button to engage the
Record Ready mode. Recording does not actually start yet.
The
[PLAY/PAUSE]
indicator will flash at the current METRONOME tempo
setting.
Record Ready mode can be disengaged before recording by pressing the
[REC]
button again.
4.
Start and stop recording.
Same as steps
3
–
5
in “Recording a performance quickly” on page 26.
3
2
3
1
2
Part button indications
Off:
Contains no data
On (green):
Contains data
On (red):
Part is enabled for
recording
If the metronome was on when
you started recording, you’ll be
able to keep time with the metro-
nome while recording, but the
metronome sound will not be
recorded.
If you want to change the tempo,
reverb type, or effect type when
rerecording a part or when
recording to another part, do so
after entering the Record Ready
mode.
If you don’t want to hear the previ-
ously recorded part while you
record (for example, when you
want to record a song different
from what you recorded on the
previous part), press the play-
back part button before pressing
the
[REC]
button so that its indi-
cator is turned off.
For more information on record-
ing, see page 29.
NOTE
NOTE
NOTE
NOTE
NOTE