Yamaha P-140 Owner'S Manual Download

Page: 27 / 68

Selecting & Playing Voices

P-140

Owner’s Manual

ENGLISH

Using the Metronome

The P-140 features a built-in metronome for convenience in practicing and use with the Recording
features.

Press the [METRONOME] button to start the metro-
nome.

The metronome sound is turned on.

Adjusting the tempo

The tempo of the metronome and user song recorder playback (the recorder is
described in the next section) can be set from 32 to 280 beats per minute by
using the

[TEMPO/FUNCTION –, +]

buttons (when the

[TEMPO/FUNCTION –,

button’s

[TEMPO]

indicator is lit).

Adjusting the time signature

The time signature (beat) of the metronome can be set by using the

[–/NO]

and

[+/YES]

buttons while holding the

[METRONOME]

button. You can set the beat

from 0 to 15. The current setting appears on the display while you are holding
the

[METRONOME]

button.

Press the [METRONOME] button to stop the metro-
nome.

1 2

[–/NO] [+/YES] buttons

[TEMPO/FUNCTION –, +] buttons

The beat indicator flashes
at the current tempo.

If the

[TEMPO/FUNCTION]

but-

ton’s

[FUNCTION]

indicator is lit,

press the

[TEMPO/FUNCTION]

button to light the

[TEMPO]

indi-

cator.

NOTE

The volume of the metronome can
be adjusted via the Metronome
Volume function in Function
(pages 37, 44).

NOTE

Holding the
[METRONOME]
button.

Beat

Summary of Contents for P-140





































































Search results

Summary of Contents for P-140

Reviews:

Related manuals for P-140

Brands by name

Popular brands

Yamaha P-140, Owner'S Manual

Search results

Summary of Contents for P-140

Reviews:

Related manuals for P-140

Brands by name

Popular brands