background image

Playing the Demonstration Tunes

15

P-120/P-120S

Engage the Preset Song Mode

...........................

Press the 

[PRESET]

 button to engage the preset song mode — 

the 

[PRESET]

[TRACK 1]

 and 

[TRACK 2]

 indicators will 

light.

Play a Preset Song

..............................................

To play any of the 50 preset songs provided, use the 

[–/NO

], 

[+/YES

]

 buttons to select the number of the tune you want to 

play (the number will appear on the LED display), then press the 

SONG [START/STOP]

 button. Playback will stop automatically 

when playback of the selected preset song has finished. 

Select “

ALL

” instead of a number to play all preset songs in 

sequence, or select “

rnd

” to continuously play all preset songs 

in random order. Press the 

SONG [START/STOP]

 button to stop 

playback. 

• Use the [MASTER VOLUME] control to adjust the volume.

• You can use the [TEMPO/FUNCTION# 

,

] buttons to adjust the 

playback tempo as required. This produces a relative tempo varia-
tion, with a range from “-50” through “ 

---

” to “50” at maximum; 

the range will differ depending on the selected song.

• The default tempo “ 

---

” is automatically selected whenever a 

new preset song is selected, or playback of a new preset song 
begins during “ 

ALL

” or “ 

rnd

” playback.

• You can play the keyboard along with the preset song playback. 

The voice playing on the keyboard can be changed.

• You can change the Brilliance control and Reverb type that is 

applied to the voice you play on the keyboard and for the preset 
song playback. You can change the Effect type and Touch sensi-
tivity that is applied to the voice you play on the keyboard. When a 
new preset song is selected or a new preset song is automatically 
started in continuous play, a reverb type that is appropriate for the 
selected song will automatically be selected.

Exit From the Preset Song Mode

.......................

Press the 

[PRESET]

 button to exit from the preset song mode, 

the indicator will go off, and return to the normal play mode.

Preset Song

1

2

NOTE

3

13

Summary of Contents for P-120 P-120S



























































Reviews: