Yamaha O2R, Owner'S Manual, Page: 92 / 414

Mixing and Automix 83
02R Getting Started Guide
Editing Channel On, Pan, & Fader events
The Event Edit (CH ON, PAN, FADER) page, shown below, allows you
edit channel on/off, pan, and fader events, and duplicate, delete, and
insert new events. Timecode addresses can be captured on-the-fly, and
new events inserted at the captured points. The Locate function provides
a speedy way to locate events in a complex automix.
1. Use the [AUTOMIX] button to locate the AUTOMIX 6/7 page.
Channel on/off, pan, and fader events are listed in the Time Code, and
Channel columns. Events can be moved by editing the timecode addresses,
and events are resorted automatically. In the Channel column, the channel
number can be edited. The value in the third column depends on the event
type selected using the CH ON (ON/OFF), PAN (L-C-R), and FADER
(dB/SEC) check boxes.
2. Use the CURSOR buttons to move up or down the event list, and
the encoder wheel to edit values.
3. Use the CURSOR buttons to select the DUPLICATE icon and press
the [ENTER] button to duplicate an event.
The selected event can be duplicated or deleted using the DUPLICATE and
DELETE icons. When the Selected CH parameter is checked, only events
corresponding to the selected channel are listed, useful for editing an
automix consisting of many events.
4. Use the CURSOR buttons to select the DELETE icon and press
[ENTER] to delete the current event.
When the SYNC icon is pressed, events occurring around the current
timecode address are displayed. The timecode counter below the SYNC
icon displays the incoming timecode. When the CAPTURE icon below that
is pressed, the current timecode addresses is captured and displayed in the
window below. Up to eight timecode addresses can be captured, and they
are stored when the 02R is turned off. The parameter next to the CAPTURE
icon is used to select the addresses. When the LOCATE icon is pressed,
events occurring around the captured timecode address are displayed.
AUTOMIX