Yamaha O2R, Owner'S Manual, Page: 71 / 414

62 Secondary Recording Tutorial
02R Getting Started Guide
Scene Memories
The 02R scene memories are a snapshot of all the digital parameters of the
mixer. The 02R has 96 mix scene memory locations. Each can be named for
easy identification.
There are two special scene memories. “0 Initial Data” is a read-only scene
memory that resets the 02R to its default settings. The other is an undo
buffer entitled “U”. Recalling the undo buffer restores the last state of the
02R.
Scene memories can be stored and recalled using the [STORE] and
[RECALL] buttons. Scene memories are selected using the SCENE
MEMORY increment or decrement buttons.
They can also be recalled using automix or by using MIDI Program
Changes from a computer, MIDI sequencer, or MIDI footswitch. You can
save scene memories to a MIDI data filer.
Storing a Scene Memory
When you store a scene memory, you should check that all the mixer
settings in the Edit Buffer are correct. Some settings may have been
adjusted accidentally, or by someone else. If you are not sure about the
exact contents of the mixer and do not want to laboriously check each
setting, recall the initial mixer settings (Scene Memory 0 “0 Initial Data”),
make the adjustments that you really want, and then store.
1. Use the SCENE MEMORY increment or decrement buttons to
select a scene memory.
You cannot store your settings to either of the special scene memories: “U”
(the UNDO buffer) or “0 Initial Data”. If you select these scene memories,
an error message appears when you attempt to store your scene memory.
When you select a new scene memory, the number displayed in the SCENE
MEMORY LED indicator flashes.
2. Press the [STORE] button.
The 02R displays a confirmation dialog box asking if you want to store
your settings in the selected scene memory. The dialog box has two icons:
“CANCEL” and “EXECUTE”.
Note: You may want to store the current mix settings to an unused scene
memory, just in case.
Note: You can customize your 02R to prevent the confirmation dialog box
appearing during STORE operations. See “Preferences” on page 198 of the User’s
Guide for more information.
STORE
RECALL
SCENE MEMORY
SCENE MEMORY