manualshive.com logo in svg

Yamaha O2R, Owner'S Manual, Page: 337 / 414

Share
Download
Yamaha O2R Owner'S Manual Download Page 337

Installing Options

227

02R User’s Guide

Digital I/O Card—ADAT (CD8-AT)

The ADAT digital I/O card (CD8-AT) is used to connect Alesis ADAT 
compatible modular digital multitrack recorders to the 02R.

Installing the CD8-AT

The ADAT digital I/O card (CD8-AT) is a single slot card. For installation 
instructions, see “Single Slot Cards” on page 221 of the User’s Guide.

1.

Connect the ADAT modular digital multitrack recorder to the 02R 
using the appropriate connectors.

Use the special ADAT optical cables to plug the IN connector of the 
CD8-AT to the OPTICAL OUT connector of the ADAT modular digital 
multitrack recorder. Plug the OUT connector of the CD8-AT to the 
OPTICAL IN connector of the ADAT recorder.

If you have installed more than one CD8-AT in the 02R and have more 
than one ADAT recorder, connect it in the same manner as the first unit.

The Alesis ADAT modular digital multitrack recorder does not have a 
dedicated wordclock output connector. If you are using the BRC ADAT 
remote controller, you can use the 48kHz OUT connector and an 
appropriate cable to plug it into the WORD CLOCK—IN connector on 
the back of the 02R and turn the 75

Ω

 terminator switch on.

If there is no dedicated wordclock output, you can obtain the 
wordclock signal required from the digital interconnect line.

Note:

A dedicated wordclock line will give you the best wordclock 

synchronization results.

02R (Word clock slave)

75

 Switch

ON

OPTICAL
INPUT

OPTICAL
OUTPUT

OPTICAL
INPUT

OPTICAL
OUTPUT

INPUT

OUTPUT

INPUT

OUTPUT

CD8-AT

CD8-AT

SLOT 1

SLOT 2

SYNC
IN

SYNC
OUT

ALESIS ADAT

Word clock master

ALESIS ADAT

(Word clock slave)

Summary of Contents for O2R































































































































































































































































































































































































































Reviews:

No comments