manualshive.com logo in svg

Yamaha O2R, Owner'S Manual, Page: 328 / 414

Share
Download
Yamaha O2R Owner'S Manual Download Page 328

218

Installing Options

02R User’s Guide

02R Options

There are a number of options you can add to your 02R. Some of these 
options add to the convenience and appearance of the 02R, such as the 
peak meter bridge (MB02) or the wooden side panels (W02SP). There is 
also a memory expansion kit (ME4M) which allows you to add up to 2 MB 
of additional memory for the automix system.

The most important options are the I/O cards.

These cards support direct digital interconnection to the latest generation of 
modular digital multitrack recorders. Alesis ADAT, TASCAM TDIF-1, 
YAMAHA, and AES/EBU cards are available.

In addition, you can insert a Digital Cascade card into one of the I/O slots, 
allowing you to cascade multiple 02Rs together to create a larger digital 
mixing system.

Analog cards are also available for connecting analog multitrack recorders 
and providing more analog inputs.

02R Options

I/O Cards

The I/O cards transmit and receive signals between your 02R and external 
devices, such as modular digital multitrack recorders, hard disk recorders, 
analog multitrack recorders, or other 02Rs. The cards come in two sizes: 
single slot and double slot:

•

Single slot I/O cards can be installed in any slot from 1 to 4.

•

Double slot I/O cards can only be installed in slots 1 or 2.

Type

Product

Format

Analog I/O Card

CD8-AD

AD/DA

CD8-AD-S

A/D

Digital I/O Card

CD8-AE

AES/EBU

CD8-AE-S

AES/EBU

CD8-AT

ADAT

CD8-TD

ΙΙ

TDIF-1

CD8-Y

YAMAHA

Digital Cascade Kit

CD8-CS

Peak Meter Bridge

MB02

Memory Expansion Kit

ME4M

Wooden Side Panels

W02SP

Summary of Contents for O2R































































































































































































































































































































































































































Reviews:

No comments