Yamaha O1V96 Owner'S Manual Download Page 12

Page: 12 / 328

Chapter 1—Welcome

01V96 Version 2—Owner’s Manual

■

Channel Configuration

•

32 Input Channels and four ST IN channels can be mixed at a time. Group multiple
channels and pair channels for stereo.

•

Eight Bus Outs and eight Aux Sends. Bus Outs 1-8 can be routed to Stereo Buses for use
as Group Buses.

•

Channel library for storing and recalling the channel settings for each Input Channel
and Output Channel

•

Four-band EQ on each channel

•

Dynamics processors on all channels (excluding ST IN channels)

•

Dynamics processor settings and EQ settings can be stored in libraries and recalled.

■

Effects

•

Four high-quality multi-channel effects (Apply effects via Aux Sends or Channel
Inserts)

•

Effect library for storing and recalling effect settings.

•

Optional Add-On Effects packages for adding effects that utilize a variety of new algo-
rithms.

■

Scene Memory

•

Scene memories for storing and recalling mix settings as Scenes

■

Surround Sound

•

Supports 3-1, 5.1, and 6.1 channel surround sound production

•

Surround channel outputs can be assigned to suit connected devices.

■

Remote Control

•

Control and manage your 01V96 from your Mac or PC using bundled Studio Manager
software.

•

Remote Layer for remote control of Pro Tools, Nuendo, Cubase SX, and other DAWs
that support the Pro Tools protocol

•

Control an external recorder via MMC commands.

■

MIDI

•

Equipped with MIDI ports and a USB port for computer connection

•

Scene recall and mix parameter changes via MIDI

Summary of Contents for O1V96









































































































































































































































































































































Search results

Summary of Contents for O1V96

Reviews:

Related manuals for O1V96

Brands by name

Popular brands

Yamaha O1V96, Owner'S Manual

Search results

Summary of Contents for O1V96

Reviews:

Related manuals for O1V96

Brands by name

Popular brands