background image

45

 En

PR

EPAR

ATIO

N

C

ONNE

CTIO

N/

INIT

IAL S

ETT

INGS

PLA

YBA

CK

S

ETTIN

GS

TRO

UBLE

S

HO
O

T

IN

G

APP

END

IX

Advanced setup

1

Press 

 

 key to turn this unit to 

standby mode.

2

While holding down INPUT key on the front 
panel, press 

 

 key on the remote 

control to turn on the power.

“ADVANCED SETUP” appears in the front panel 
display.

3

Release INPUT key on the front panel.

4

Press  

U

/

 

V

 to select the desired 

menu on the front panel display and then 
press  

ENTER 

key. 

1)

5

Change setting by pressing 

 

Y

/

Z

 key. 

2)

6

Press 

 

 key to set this unit to the 

standby mode.

The new setting will be reflected when you turn on the 
unit by pressing 

 

 key.

Menu

Description

Selectable item/Adjustable range

TURN ON VOLUME

Sets volume level at power-on.

Off* (Not set), 01 to 99, MAX (Maximum)

MAX VOLUME SET

Sets maximum volume.

01 to 99, MAX* (Maximum)

PANEL INP. KEY

Enables/disables the INPUT key on the front panel.

P.INPUT: ON* (Enabled), P.INPUT:OFF (Disabled)

F.PANEL. KEY

Enables/disables the keys on the front panel.

P.INPUT: ON* (Enabled), P.INPUT:OFF (Disabled)

R.INPUT POWER

Enables/disables power-on by remote control input 
keys when the unit is in standby mode.

R.INPUT PW: OFF* (Disables power-on), 
R.INPUT PW: ON (Enables power-on) 

AC ON STANDBY

Sets whether or not this unit returns to its previous 
state when AC power is restored after a temporary 
power loss.

AC STANDBY: OFF* (Restores the state before 
power was lost), 
AC STANDBY: ON (Enters standby mode)

MEMORY PROTECT

Prohibits saving of the settings by using the memory 
setting function (

p. 22).

PROTECT:OFF* (Protect is not performed),
PROTECT:ON (Protect is performed)

DEMO MODE

Demonstrates sound beam.

 3)

BEAM DEMO:OFF* (Normal playback),
BEAM DEMO:ON (Demo mode)

FACTORY PRESET

Resets all settings to their default values.

PRST:CANCEL* (Reset is not performed),
PRST: RESET (Reset is performed)

To return to the previous menu, press 

 RETURN key.

The default settings are marked with “*”.

This unit outputs sound beam down-mixed to 1 channel moving 
horizontally to right and left. By this function, you can feel how sound 
beam is output from this unit.
“Demo” appears in the front panel display while setting demo mode.

Start/stop moving horizontally

Press 

 Off key.

Auto Demo On: Sound beam automatically moves horizontally to right 
and left
Auto Demo Off: The direction of sound beam is fixed

Adjust the angle of sound beam manually

Press 

 SURROUND/

 STEREO key in the state of “Auto Demo 

Off”

1)

y

2)

y

3)

y

Summary of Contents for NS-SWP600




























































Reviews: