background image

3

UNPACKING

After unpacking, check that the following items are contained.

z

 

Stereo

For best stereo performance, install the left and right 
speakers at equal distance from the listening position. 
Each speaker should be separated by a distance of 6-
10 ft. And the center of the speaker should be placed 
at the listener’s ear level. 

z

 

Home Theater

Install the left and right front speakers on either side of 
your TV, with the center of the speaker at the listener's 
ear level. The center channel speaker can be installed 
horizontally above or below the TV. Surround speakers 
should ideally be placed behind the listening area, at 
least as far apart as the front speakers and up to 2 
additional feet apart per side. The height of the 
speaker should be at a minimum of ear level or 
preferably somewhat higher.

TOOLS NEEDED

SPEAKER PLACEMENT

Though this speaker is a magnetically shielded type, there may be some influence on a TV picture depending on the 
type of TV or the placement of the speaker. In such a case, place the speaker apart from the TV so that there is no 
influence on the TV picture.

Paint Protective 

cover x2

NS-IW660

Speaker System x2

Speaker Grill x2 

Cutout template x1 

Pencil

Small level

Drill

Sturdy wire  

(such as a coat hanger)

Drywall saw

Philips screwdriver

Wire strippers

Safety goggles

Gloves

Glue Strips x2

7-9/16”

10-19/32”

3-9/16”

11-15/16”

8-29/32”

Summary of Contents for NS-IW660 - Left / Right CH Speakers









Reviews: