background image

English

E-

1

Read this before using the speakers.

To assure the finest performance, please read this manual
carefully.  Keep it in a safe place for future reference.

Install the speakers in a cool, dry, clean place – away from
windows, heat sources, sources of excessive vibration,
dust, moisture and cold.  Avoid sources of humming
(transformers, motors).  To prevent fire or electrical shock,
do not expose the speakers to rain or water.

To prevent the enclosure from warping or discoloring, do
not place the speakers where they will be exposed to
direct sunlight or excessive humidity.

Do not place the following objects on the speakers:
Glass, china, etc.

If glass etc. falls by vibrations and breaks, it may cause
personal injury.

A burning candle etc.

If the candle falls by vibrations, it may cause fire and
personal injury.

A vessel with water in it

If the vessel falls by vibrations and water spills, it may
cause damage to the speakers, and/or you may get an
electric shock.

Do not place the speakers where foreign objects such as
water drips might fall.  It might cause a fire, damage to
the speakers, and/or personal injury.

PRECAUTIONS

The speaker is constructed with the majority of the weight
located in its upper portion, and is thus susceptible to falling
over if proper care is not taken to insure its stability. If the
speaker falls over, it may damage the speaker or be the
cause of injury (or even death) to persons and/or damage to
personal property.

For safe and proper use of the speaker:

•  Position the speaker in a location that is solid, level,

smooth, and low (with respect to the floor).

•  Do not push or apply pressure to the side of the speaker

when moving, or lean objects against the side of the
speaker.

•  Do not sit on or set objects on top of the speaker.

PRECAUTIONS WHEN POSITIONING THE SPEAKERS

Vibrations or jolts associated with earthquakes and other
phenomena or activities may cause the speaker to fall over.
For safety reasons, using commercially available products
that increase stability in the speaker is recommended
(metal fittings or chains, etc.).

Use the stands included with the speakers to increase
stability:

Be sure to use the stands regardless of where the speakers
are positioned. Attaching the stands included with the
speakers reinforces the base of the speaker not to fall over.
Please be cautioned that even though the stands are
connected, this does not guarantee that the speakers will
not fall over.

NS-8390

Speaker System

OWNER’S MANUAL

U G R

Thank you for selecting this YAMAHA NS-8390 speaker system.

Do not place the speakers where they are liable to be
knocked over or struck by falling objects. Stable
placement will also ensure better sound performance.

Placing the speakers on the same shelf or rack as the
turntable can result in feedback.

Any time you note distortion, reduce the volume control
on your amplifier to a lower setting. Never allow your
amplifier to be driven into “clipping”. Otherwise the
speakers may be damaged.

When using an amplifier with a rated output power higher
than the nominal input power of the speakers, care should
be taken never to exceed the speakers’ maximum input.

Do not attempt to clean the speakers with chemical solvents
as this might damage the finish. Use a clean, dry cloth.

Do not attempt to modify or fix the speakers.  Contact
qualified YAMAHA service personnel when any service
is needed.  The cabinet  should never be opened for any
reasons.

Secure placement or installation is the owner’s
responsibility.
YAMAHA shall not be liable for any accident caused
by improper placement or installation of speakers.

NS-8390 ENG(02.4.16)a

02.6.4, 0:13 AM

1

Summary of Contents for NS-8390






Reviews: