background image

English

E-

1

Read this before using the speakers.

To assure the finest performance, please read this manual
carefully.  Keep it in a safe place for future reference.

Install the speakers in a cool, dry, clean place – away from
windows, heat sources, sources of excessive vibration,
dust, moisture and cold.  Avoid sources of humming
(transformers, motors).  To prevent fire or electrical shock,
do not expose the speakers to rain or water.

To prevent the enclosure from warping or discoloring, do
not place the speakers where they will be exposed to
direct sunlight or excessive humidity.

Do not place the following objects on the speakers:
Glass, china, etc.

If glass etc. falls by vibrations and breaks, it may cause
personal injury.

A burning candle etc.

If the candle falls by vibrations, it may cause fire and
personal injury.

A vessel with water in it

If the vessel falls by vibrations and water spills, it may
cause damage to the speakers, and/or you may get an
electric shock.

Do not place the speakers where foreign objects such as
water drips might fall.  It might cause a fire, damage to
the speakers, and/or personal injury.

Do not place the speakers where they are liable to be
knocked over or struck by falling objects. Stable
placement will also ensure better sound performance.

PRECAUTIONS

Thank you for selecting this YAMAHA NS-10MMTS speaker system.

Placing the speakers on the same shelf or rack as the
turntable can result in feedback.

Never put a hand or a foreign object into the port located
on the rear of the speaker as this might cause personal
injury and/or damage to the speaker.

When moving the speaker, do not hold the port as it
might cause personal injury and/or damage to the
speaker.

Any time you note distortion, reduce the volume control
on your amplifier to a lower setting. Never allow your
amplifier to be driven into “clipping”. Otherwise the
speakers may be damaged.

When using an amplifier with a rated output power higher
than the nominal input power of the speakers, care should
be taken never to exceed the speakers’ maximum input.

Do not attempt to clean the speakers with chemical solvents
as this might damage the finish. Use a clean, dry cloth.

Do not attempt to modify or fix the speakers.  Contact
qualified YAMAHA service personnel when any service
is needed.  The cabinet  should never be opened for any
reasons.

Secure placement or installation is the owner’s
responsibility.
YAMAHA shall not be liable for any accident caused
by improper placement or installation of speakers.

Check that the following items are included.

Speaker cable (10m) x 1

Mounting bracket x 1

Screw x 2

Pad x 2

ACCESSORIES

NS-10MMTS

Speaker System

OWNER’S MANUAL

G

Summary of Contents for NS-10MMTS






Reviews: