37
Playing audio from this unit through
Bluetooth
-
compatible speakers or headphones
You can listen to audio (that is being played on the unit) through
Bluetooth
-compatible
speakers or headphones. To do this, you will use the MusicCast CONTROLLER app
(installed on your mobile device) to transmit audio to
Bluetooth
-compatible speakers or
headphones.
NOTE
• Use
Bluetooth
-compatible speakers or headphones that support the A2DP profile.
• You cannot use both a
Bluetooth
device (such as a smartphone) and
Bluetooth
speakers (or
headphones) at the same time.
• AirPlay or DSD audio will not be transferred.
• Examples of the MuscCast CONTROLLER screens are taken from an iPhone.
• Please also refer to the instruction manual for your
Bluetooth
device.
1
Use the MusicCast CONTROLLER app to connect the unit to a
network, and register the unit with MusicCast (page 20).
2
Use the MusicCast CONTROLLER app to play a song (via any device
other than a
Bluetooth
device).
3
Pair
Bluetooth
-compatible speakers (or headphones) and the unit to
establish a
Bluetooth
connection.
4
Tap
in the MusicCast CONTROLLER app’s playback screen.
5
Tap “Bluetooth Transmission”.
6
Enable the
Bluetooth
Transmission function, and then select your
Bluetooth
-compatible speakers (or headphones) as the transmission
destination.
When the connection is established, the unit’s Bluetooth indicator will light up, and
audio will play from the
Bluetooth
-compatible speakers (or headphones).
7
Close the Setup screen.
NOTE
• To disconnect
Bluetooth
-compatible speakers (or headphones), perform one of the following
operations.
– Disconnect from the
Bluetooth
-compatible speakers or headphones.
– Disable the MusicCast CONTROLLER app’s
Bluetooth
Transmission function.
– Select “Bluetooth” as the source for this unit.
Bluetooth
-compatible
speakers/headphones
This unit
Tap here.
Tap here.
