Instrument an
d
control functions
4-18
4
EAU84561
Quick shifter
The quick shifter allows for full-throttle,
clutch lever-less, electronically-assist-
ed upshifts. When the shift switch de-
tects motion in the shift pedal, engine
power and drive torque are momen-
tarily adjusted to allow the upshift to
occur.
TIP
The quick shifter operates when
traveling at least 20 km/h (12 mi/h)
with an engine speed of 4000
r/min or higher, and only when ac-
celerating.
The quick shifter does not operate
when the clutch lever is pulled.
To turn the system off
1. Turn the main switch off.
2. Move the shift pedal upward so
that the shift rod is partially re-
tracted into the shift switch, and
hold it in that position.
3. Turn the main switch on, and after
10 seconds release the shift ped-
al.
4. “
” will disappear.
TIP
To turn on the quick shifter, perform
the same procedure.
EAU26827
Brake lever
The brake lever is located on the right
side of the handlebar. To apply the
front brake, pull the lever toward the
throttle grip.
The brake lever is equipped with a
brake lever position adjusting dial. To
adjust the distance between the brake
lever and the throttle grip, push the
brake lever away from the throttle grip
and rotate the adjusting dial. Make
sure the setting number on the adjust-
ing dial aligns with the match mark on
the brake lever.
1. Shift switch
2. Rod
1
2
1. Brake lever
2. Distance
3. Brake lever position adjusting dial
4. Match mark
3
4
1
2
UB5B13E0.book Page 18 Wednesday, November 10, 2021 11:42 AM
