Yamaha Neo's 4 2018, Owner'S Manual

Page: 63 / 78

Perio d ic maintenance an d a d justment
6-28
6
EAU24285
Replacin g a turn si g nal li g ht
b ul b or the tail/ b rake li g ht b ul b
1. Remove the lens by removing the
screws.
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
NOTICE:
Do not over-
ti g hten the screws, otherwise
the lens may b reak.
[ECA10682]
EAU24331
License plate li g ht
If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
1. Screw
2. Tail/brake light lens
1. Tail/brake light bulb
1. Turn signal light bulb
U2ACE7E0.book Page 28 Tuesday, October 3, 2017 9:25 AM