Yamaha N MAX GPD150-A 2015, Service Manual

Page: 27 / 450

FEATURES
1-18
EAS30682
INSTRUMENT FUNCTIONS
Multi-function meter unit
WARNING
EWA12423
Be sure to stop the vehicle before making
any setting changes to the multi-function
meter unit. Changing settings while riding
can distract the operator and increase the
risk of an accident.
The multi-function meter unit is equipped with
the following:
• a speedometer
• a clock
• a fuel meter
• an instantaneous fuel consumption meter
• a multi-function display
TIP
Be sure to turn the key to “ON” before using the
“SELECT” and “RESET” buttons.
Speedometer
The speedometer shows the vehicle’s traveling
speed.
Clock
The clock uses a 12-hour time system.
[To set the clock]
1. Turn the key to “ON”.
2. Push the “SELECT” button and “RESET” but-
ton together for at least two seconds.
3. When the hour digits start flashing, push the
“RESET” button to set the hours.
4. Push the “SELECT” button, and the minute
digits will start flashing.
5. Push the “RESET” button to set the minutes.
6. Push the “SELECT” button and then release
it to start the clock.
Fuel meter
The fuel meter indicates the amount of fuel in the
fuel tank. The display segments of the fuel meter
disappear towards “E” (Empty) as the fuel level
decreases. When the last segment and fuel level
warning indicator “ ” start flashing, refuel as
soon as possible.
TIP
This fuel meter is equipped with a self-diagnosis
system. If a problem is detected in the electrical
circuit, the following cycle is repeated until the
malfunction is corrected: fuel level segments
1. Fuel meter
2. Clock
3. Speedometer
4. Instantaneous fuel consumption meter
5. “RESET” button
6. Multi-function display
7. “SELECT” button
2 3 1 4
6 7 5
1. Clock
1. Fuel meter
2. Fuel level warning indicator “
”
1
1 2