Yamaha MWS150-A Owner'S Manual Download

Page: 41 / 98

Instrument an

control functions

4-22

EAU39657

Auxiliary DC jack

WARNING

EWA14361

To prevent electrical shock or short-
circuitin

, make sure that the cap is

installe

when the auxiliary DC jack

is not

ein

use

NOTICE

ECA15432

The accessory connecte

to the

auxiliary DC jack shoul

not

e use

with the en

ine turne

off, an

the

loa

must never excee

12 W (1 A),

otherwise the fuse may

low or the

attery may

ischar

This vehicle is equipped with an auxil-
iary DC jack in the accessory box.
A 12-V accessory connected to the
auxiliary DC jack can be used when the
key is in the “ON” position and should
only be used when the engine is run-
ning.

To use the auxiliary DC jack

1. Open the accessory box lid. (See

page 4-18.)

2. Turn the key to “OFF”.

3. Remove the auxiliary DC jack cap.

4. Turn the accessory off.
5. Insert the accessory plug into the

auxiliary DC jack.

6. Turn the key to “ON”, and then

start the engine. (See page 6-1.)

7. Turn the accessory on.

EAU70641

Auxiliary DC connector

This vehicle is equipped with an auxil-
iary DC connector. Consult your
Yamaha dealer before installing any
accessories.

1. Auxiliary DC jack cap

1. Auxiliary DC jack

UBE2EYE0.book Page 22 Monday, July 17, 2017 2:03 PM

Summary of Contents for MWS150-A



































































































Search results

Summary of Contents for MWS150-A

Reviews:

Related manuals for MWS150-A

Brands by name

Popular brands

Yamaha MWS150-A, Owner'S Manual

Search results

Summary of Contents for MWS150-A

Reviews:

Related manuals for MWS150-A

Brands by name

Popular brands