Instrument an
d
control functions
3-9
3
V-
b
elt replacement in
d
icator “V-
BELT”
This indicator come on at every 20000
km (12500 mi) to indicate that the V-
belt should be replaced.
If the V-belt replacement indicator has
come on, after replacing the V-belt, re-
set the V-belt replacement indicator
and the V-belt replacement tripmeter.
To reset them both, select the V-belt
replacement tripmeter, and then push
the “RESET” button for one second.
While “V-BELT” is flashing, push the
“RESET” button for three to four sec-
onds. The V-belt replacement tripme-
ter will be reset and the V-belt
replacement indicator will go off.
If the V-belt is replaced before the V-
belt replacement indicator comes on
(i.e., before the periodic V-belt replace-
ment interval has been reached), the V-
belt replacement tripmeter must be re-
set for the next periodic V-belt replace-
ment to be indicated at the correct
time.
EAU1234H
Han
d
le
b
ar switches
Left
Ri
g
ht
1. V-belt replacement indicator “V-BELT”
2. V-belt replacement tripmeter
1
2
1. Dimmer switch “
/
”
2. Turn signal switch “
/
”
3. Horn switch “
”
1. Start switch “
”
1
2
3
1
U2CME2E0.book Page 9 Friday, August 21, 2015 9:16 AM
