Front & Rear Panels
MW12 Owner’s Manual
17
English
Master Control Section
1
ST Master Fader
Adjusts the signal level to the ST OUT jacks.
n
The stereo master fader has no effect on the signal
being sent to the computer via the USB interface.
2
GROUP 1-2 Fader
Adjusts the signal level to the GROUP OUT 1 and
GROUP OUT 2 jacks.
3
TO ST Switch
If this switch is on (
), the mixer sends the signals
processed by the GROUP 1-2 fader (
2
) onto the Stereo
bus. The Group 1 signal goes to Stereo L and the Group
2 signal goes to Stereo R.
4
Master SEND
• Master AUX 1/2 Control
Adjusts the signal level, respectively. These are the
signals that are output to the AUX1 and AUX2 SEND
jacks.
5
RETURN
• AUX 1/2 Control
Adjust the level of the mixed L/R signal sent from the
RETURN jacks (L (MONO) and R) to the AUX1 and
AUX2 buses.
• ST Control
Adjust the level of the signal sent from the RETURN
jacks (L (MONO) and R) to the Stereo bus.
n
If you supply a signal to the RETURN L (MONO) jack
only, the mixer outputs the identical signal to both the L
and R Stereo buses.
6
2TR IN/USB Control
Adjusts the level of signals received via 2TR IN, as well
as the level of signals received by the MW12 from the
computer via the USB interface.
2
#
)
1
@
4
5
6
!
7
8
3
9
Summary of Contents for MW12
Page 1: ......