Yamaha MusicCast TSR-7810 Owner'S Manual Download Page 43

Page: 43 / 149

Measuring at multiple listening positions
(multi measure)

When “Multi Position” is set to “Yes”, follow the procedure below for

measurement. It takes about 10 minutes to measure 8 listening

positions.

If any error message (such as E-1) or warning message (such as W-1) appears, see “Error

messages” (p.46) or “Warning messages” (p.47).

To start the measurement, use the Cursor keys to select

“Measure” and press ENTER.

The measurement will start in 10 seconds. Press ENTER again to

start the measurement immediately.

To cancel the measurement temporarily, press RETURN.

The following screen appears on the TV when the measurement at

the first position finishes.

Move the YPAO microphone to the next listening position

and press ENTER.

Repeat Step 2 until measurements at all listening positions (up to

8) have been taken.

When the measurements at the positions you want to

measure are completed, use the Cursor keys to select

“CANCEL” and press ENTER.

When you have taken measurements at 8 listening positions, the

following screen appears automatically.

To check the measurement results, select “Result”. For details, see “Checking

the measurement results” (p.45).

Use the Cursor keys to select “Save/Cancel” and press

ENTER.

To save the measurement result, use the Cursor keys to

select “SAVE” and press ENTER.

The adjusted speaker settings are applied.

To finish the measurement without saving the result, select “CANCEL”.

HDMI

ENTER

RETURN

POP-UP/MENU

TOP MENU

PHONO

NET

USB

BLUETOOTH

TUNER

AUDIO

V-AUX

RADIO

NET

DVD

SCENE

MUTE

OPTION

SCREEN

DISPLAY

MODE

MOVIE

MUSIC

INFO

SLEEP

ENT

PRESET

TUNING

VOLUME

PROGRAM

HDMI OUT

PARTY

BAND

SUR. DECODE STRAIGHT

ENHANCER PURE DIRECT

MEMORY

MAIN

ZONE 2

HDMI

POP-UP/MENU

TOP MENU

PHONO

NET

USB

BLUETOOTH

TUNER

AUDIO

V-AUX

RADIO

NET

DVD

SCENE

MUTE

OPTION

SCREEN

DISPLAY

MODE

MOVIE

MUSIC

INFO

SLEEP

ENT

PRESET

TUNING

VOLUME

PROGRAM

HDMI OUT

PARTY

BAND

SUR. DECODE STRAIGHT

ENHANCER PURE DIRECT

MEMORY

MAIN

ZONE 2

ENTER

RETURN

Cursor keys

Summary of Contents for MusicCast TSR-7810






















































































































































Search results

Summary of Contents for MusicCast TSR-7810

Reviews:

Related manuals for MusicCast TSR-7810

Brands by name

Popular brands

Yamaha MusicCast TSR-7810, Owner'S Manual

Search results

Summary of Contents for MusicCast TSR-7810

Reviews:

Related manuals for MusicCast TSR-7810

Brands by name

Popular brands