Setting the use of ARC
Selects whether to output TV audio to the speakers connected to the unit when “HDMI Control” in the
“Setup” menu is set to “On”.
Setup menu
“HDMI” > “ARC”
Settings
Off
Disables ARC.
On
Enables ARC.
NOTE
You do not need to change “On” (default setting) normally. In case noises are produced because TV audio signals input to the unit are
not supported by the unit, set to “Off”. And use the TV’s speakers.
Related links
(
“Setting the use of HDMI Control” (p.173)
(
“Basic operation of the Setup menu” (p.151)
179
CONFIGURATIONS > Configuring various functions (Setup menu)
Summary of Contents for MusicCast RX-V4A
Page 1: ...AV Receiver User Guide EN ...