Yamaha MusicCast R-N2000ASL User Manual Download Page 134

Page: 134 / 150

Making a wireless connection with your iPhone (WAC)

Apply the network settings of your iPhone (iOS device) to this product to set up a wireless connection.

Before starting setup, check and make sure your iPhone is connected to the wireless LAN router (access
point).

Setup menu

“Network” > “Connection” > “Wireless (Wi-Fi)”

Select “Share Wi-Fi (iOS)” with the cursor keys (

While the Wi-Fi indicator is flashing, enter the Wi-Fi Settings screen of your iOS
device, and set this product to the AirPlay speaker.

Select the wireless network (access point) which is shared with this product.

After the sharing operation is complete, this product will connect automatically to the
selected wireless network (access point).

And the Wireless LAN indicator on the front panel will light up.

This completes the wireless connection process.

NOTE

(

The following settings are initialized.

(

Network settings

(

Bluetooth settings

(

Content registered to presets (songs from a media server, Internet radio stations, etc.)

(

Account information of the various music services

(

Repeat/shuffle settings

(

This product cannot connect to a wireless LAN router (access point) using the WEP encryption method. In such case, try a different
connection method.

(

A warning message is displayed if a network cable is connected to this product. Unplug the network cable before operating the
product.

(

If an AirPlay password has been set up, cancel it temporarily and connect using WAC.

Summary of Contents for MusicCast R-N2000ASL























































































































































Search results

Summary of Contents for MusicCast R-N2000ASL

Reviews:

Related manuals for MusicCast R-N2000ASL

Brands by name

Popular brands

Yamaha MusicCast R-N2000ASL, User Manual

Search results

Summary of Contents for MusicCast R-N2000ASL

Reviews:

Related manuals for MusicCast R-N2000ASL

Brands by name

Popular brands