Configuring the speaker settings
Flow of the speaker configurations
Before using the unit, adjust the speaker settings such as volume balance and acoustic parameters. With the
supplied YPAO microphone, the unit detects speaker connections and measures the distances from them to
your listening position(s) that is measuring position(s). And then, the unit automatically optimizes the
speaker settings such as volume balance and acoustic parameters. (YPAO: Yamaha Parametric room Acoustic
Optimizer)
NOTE
(
During the measuring process, test tones are output at high volume. You cannot adjust the volume.
(
During the measuring process, stay in a back corner of the room and note the following for accurate measurement.
(
Keep the room as quiet as possible.
(
Do not block sound between the speakers and the YPAO microphone.
(
Do not connect headphones.
1
Select the unit’s speaker impedance settings as necessary.
2
Configure the corresponding speaker settings.
3
Set the volume of the subwoofer to half. If the crossover frequency is adjustable,
set it to maximum.
VOLUME
HIGH CUT
CROSSOVER/
MIN
MAX
MIN
MAX
9
4
Place the YPAO microphone at your listening position (same height as your ears).
We recommend the use of a tripod as a microphone stand and adjust your listening position
(same height as your ears). You can use the tripod screws to stabilize the microphone.
94
PREPARATIONS > Configuring the speaker settings
Summary of Contents for MusicCast AVENTAGE RX-A4A
Page 1: ...AV Receiver User Guide EN ...
