manualshive.com logo in svg

Yamaha MusicCast AVENTAGE RX-A4A, User Manual

The Yamaha MusicCast AVENTAGE RX-A4A is a high-performance AV receiver that delivers exceptional audio quality and functionality. To unlock its full potential, you can easily obtain the user manual for free download on our website manualshive.com. Discover the ultimate audio experience with this state-of-the-art device.

Share
Download
background image

Configuring the speaker settings

Selecting the speaker setting pattern

Registers speaker setting patterns.

The following speaker settings will be memorized in the selected pattern.

(

Power Amp Assign

(

Configuration

(

Distance

(

Level

(

Parametric EQ

(

Measurement results (YPAO)

Setup menu

“Speaker” > “Setting Pattern”

Settings

Pattern1, Pattern2

NOTE

(

The setting pattern currently selected is shown at the center of the diagram on the right side of the screen.

(

This function is useful when you want to save certain settings according to the varying conditions of your listening environment.
For example, you can switch the settings when curtains are open or closed.

Related links

“Basic operation of the Setup menu” (p.191)

201

CONFIGURATIONS > Configuring various functions (Setup menu)

Summary of Contents for MusicCast AVENTAGE RX-A4A




























































































































































































































































































































































































































Reviews:

No comments

Related manuals for MusicCast AVENTAGE RX-A4A

Zaxcom RX-12 User Manual preview
RX-12
Brand: Zaxcom Pages: 22
Yaesu FT-7900R Operating Manual preview
FT-7900R
Brand: Yaesu Pages: 84
Yaesu FT-7800R Brochure & Specs preview
FT-7800R
Brand: Yaesu Pages: 2
Yaesu FT-747GX Operating Manual preview
FT-747GX
Brand: Yaesu Pages: 42
Yaesu FT-5200 User Manual preview
FT-5200
Brand: Yaesu Pages: 46
Yaesu FT-991 Key Press Sequences preview
FT-991
Brand: Yaesu Pages: 2
Yaesu FT-991 Reference Book preview
FT-991
Brand: Yaesu Pages: 20
Yaesu FT-991 Operating Manual preview
FT-991
Brand: Yaesu Pages: 96
Yaesu FT-8800R Technical Supplement preview
FT-8800R
Brand: Yaesu Pages: 55
Yaesu FT-60R Specifications preview
FT-60R
Brand: Yaesu Pages: 2
Yaesu FT-51R Owner'S Manual preview
FT-51R
Brand: Yaesu Pages: 78
Yaesu FT DX 9000 CONTEST - 2 Technical Supplement preview
FT DX 9000 CONTEST - 2
Brand: Yaesu Pages: 410
Yaesu FT-857 series Operation Manual preview
FT-857 series
Brand: Yaesu Pages: 132
Yaesu FT-100 Micro Mobile Undocumented preview
FT-100 Micro Mobile
Brand: Yaesu Pages: 55
Yaesu FT-2000 - MENU MODE LIST Technical Supplement preview
FT-2000 - MENU MODE LIST
Brand: Yaesu Pages: 206
Yaesu FTM-400XDR Operating Manual preview
FTM-400XDR
Brand: Yaesu Pages: 17
Yaesu FT-2000 - MENU MODE LIST Manual preview
FT-2000 - MENU MODE LIST
Brand: Yaesu Pages: 18
Yaesu FT-991A Technical Supplement preview
FT-991A
Brand: Yaesu Pages: 131

Brands by name

Popular brands

Load more brands