Yamaha MU90R Owner'S Manual Download Page 91

Page: 91 / 165

PERFORMANCE MODE

Use the SELECT

buttons to select the Program Number pa-

rameter, then use the VALUE

buttons or data dial to select

the desired Performance number.

Performance number

From the All Part display, press the PART

buttons simulta-

neously, so that the Single Part display is shown.

Indicates currently selected Part.

Select the desired Part by using the PART

buttons.

Select the desired Voice bank for the Part by using the SELECT

buttons to select the Bank parameter, and using the VALUE

buttons or data dial to change the bank number.

Select the desired Voice for the Part by using the SELECT

buttons to select the Program Number parameter, and using the

VALUE

buttons or data dial to change the Voice number.

To return to the All Part display from the Single Part display, either

press the PART

buttons simultaneously, or press the EXIT

button.

Summary of Contents for MU90R






































































































































































Search results

Summary of Contents for MU90R

Reviews:

Yamaha MU90R, Owner'S Manual, Page: 91 / 165

Search results

Summary of Contents for MU90R

Reviews: