manualshive.com logo in svg

Yamaha MU90R, Owner'S Manual, Page: 53 / 165

Share
Download
Yamaha MU90R Owner'S Manual Download Page 53

4 4

MULTI MODE

Reverb Send (RevSend)

This determines the level of the selected Part’s Voice that is sent to the
Reverb effect. A value of 000 results in a completely “dry” Voice sound.

Graphically indicates current Reverb Send setting.

Range:

000 — 127

N O T E

Keep in mind that the Reverb effect must be properly enabled and set for this parameter to

work as intended. (See page 101.)

Chorus Send (ChoSend)

This determines the level of the selected Part’s Voice that is sent to the
Chorus effect. A value of 000 results in a completely “dry” Voice sound
(no Chorus effect).

Graphically indicates current Chorus Send setting.

Range:

000 — 127

N O T E

Keep in mind that the Chorus effect must be properly enabled and set for this parameter to

work as intended. (See page 103.)

Variation Send (VarSend)

This determines whether the selected Part’s Voice is sent to the Varia-
tion effect or not. A setting of “off” results in no Variation effect being
applied to the Voice.

Summary of Contents for MU90R






































































































































































Reviews:

No comments