manualshive.com logo in svg

Yamaha MU90R, Owner'S Manual, Page: 42 / 165

Share
Download
Yamaha MU90R Owner'S Manual Download Page 42

GUIDED TOUR

3 3

Using the MU90R with a MIDI Data Storage Device

You can also use the MU90R with a MIDI data storage device, such as the
Yamaha MDF2 MIDI Data Filer. This lets you save or back up whatever
changes you’ve made in the settings of the Utility and Part Edit modes, as
well as changes to the EQ built-in effects and Performances. Then, when
you want to recall those settings, you can transfer the appropriate data from
the storage device.

The MDF2 also allows you to play compatible song data on the

MU90R directly from the MDF2 itself, without the need of a sequencer.

Make sure that the MU90R is properly connected to the data storage

device (via MIDI). Use the Dump Out function (page 119) to send data to
the device. Also refer to the owner’s manual of your data storage device
for specific operating instructions in receiving or sending data.

MDF2

MIDI IN

MIDI OUT

MIDI CABLE

Summary of Contents for MU90R






































































































































































Reviews:

No comments