manualshive.com logo in svg

Yamaha MU90R, Owner'S Manual, Page: 31 / 165

Share
Download
Yamaha MU90R Owner'S Manual Download Page 31

2 2

GUIDED TOUR

Changing Some of the Settings — Part Controls

You can make changes to each individual Part by using the Part controls.
These are always displayed in the Play mode, giving you at-a-glance con-
firmation of the various basic settings of the MU90R. Let’s take a look at
the Play display again:

       PART         MIDI      BANK/PGM#  VOL 

 

EXP  PAN 

 

 REV CHO  VAR    KEY

Each of these settings can be made independently for each of the Parts. For
example, each Part could have a different Volume setting, or a different Pan
setting. Try going through the brief sections below and making some
changes in the Part controls yourself.

Selecting Another Part and Changing its MIDI Channel

Here we’ll select Part 2 and change its MIDI channel to 1, so that it
matches the MIDI channel of Part 1. This allows you to play the Voices of
both Part 1 and Part 2 over MIDI channel 1.

Voice name, bank number and program number
for the selected Part.

Note Shift setting
for the selected
Part.

Chorus Send setting for the
selected Part.

Variation Send setting
for the selected Part.

Pan setting for the selected Part.

Expression setting for the selected Part.

MIDI receive channel for the selected Part.

Volume setting for the selected Part.

Part number.

Summary of Contents for MU90R






































































































































































Reviews:

No comments