manualshive.com logo in svg

Yamaha MU90R, Owner'S Manual, Page: 28 / 165

Share
Download
Yamaha MU90R Owner'S Manual Download Page 28

GUIDED TOUR

1 9

Selecting Voices

In this brief section, you’ll learn how to select other Voices. You can do
this directly from the panel of the MU90R or remotely, from your MIDI
keyboard.

Operation

1

First, select a Part. Use the 

PART

 

q

 buttons to select Part 1.

Press the appropriate button until “01” appears in the PART sec-
tion of the display.

2

Use the 

SELECT 

w

 buttons to move the arrow cursor to the

right side of the instrument icon, as shown below.

3

Use the 

VALUE

 

q

 buttons or data dial to change the Voice

number. In the display below, Voice number 26 has been selected.

Voice name.

Voice number (program number).

Instrument icon of current Voice.

MIDI receive channel for current Part.

Part number. (This is selectable only with the 

PART

 

q

 buttons.)

Solid arrow at Voice number (currently selected).

Arrow cursor (indicates currently selected control).
The arrow is directly above “PGM#” on the panel,
indicating that Program Number is currently selected.

Use these to move arrow cursor.

Summary of Contents for MU90R






































































































































































Reviews:

No comments