manualshive.com logo in svg

Yamaha MU90R, Owner'S Manual, Page: 135 / 165

Share
Download
Yamaha MU90R Owner'S Manual Download Page 135

126

UTILITY MODE

3

To stop playback of the song, press the EXIT button.

4

To exit from the Demo Song function, press the EXIT button

again.

Sound Module Mode (MODE)

This lets you select the operating mode of the MU90R. Press the MODE
button, then use the SELECT 

w

 buttons to select the desired Sound

Module mode: XG  (Extended General MIDI), TG300B  (General MIDI),
C/M (Computer Music) or PFM (Performance). If XG, TG300B or C/M
are selected, the MU90R automatically sets itself to the Multi mode. When
PFM is selected, the MU90R is in the Performance mode. (See page 80.)

The bottom right of the display indicates the currently selected Sound

Module mode.

Press the EXIT button (or any one of the other mode select buttons: PLAY,
EDIT, UTIL, EFFECT or EQ) to use the MU90R in the current mode.

N O T E

When the MU90R is not set to the XG mode and an XG System On message is received, the

MU90R changes to the XG mode after a slight pause of 0.5 seconds.

   Arrow indicates selected Sound Module mode.

Summary of Contents for MU90R






































































































































































Reviews:

No comments