manualshive.com logo in svg

Yamaha MU90R, Owner'S Manual, Page: 128 / 165

Share
Download
Yamaha MU90R Owner'S Manual Download Page 128

UTILITY MODE

119

Settings: 1  (displays  only  banks  with  unique  Voices),

2  (displays  all  banks)

Dump Out Functions

The Dump Out functions allow you to save the various settings of the
MU90R (such as settings for Parts, Performances, system, etc.) to a MIDI
sequencer, computer or a MIDI data recorder (such as the Yamaha MDF2
MIDI Data Filer).

The following illustrations show example connections for the Dump

Out functions.

Saving and Restoring Data via MIDI

Bulk Dump data can be sent and received using the MIDI IN and MIDI OUT connections.

MU90R

MIDI Data 

Recorder

MIDI IN

MIDI OUT

MIDI IN

MIDI OUT

Saving and Restoring Data via TO HOST

Computer 

(with sequencer or 

MIDI librarian 

software)

TO HOST

SERIAL PORT

Bulk Dump data can be sent and received using the MIDI IN and MIDI OUT connections.

MU90R

Operation

Summary of Contents for MU90R






































































































































































Reviews:

No comments