manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

MU128 Guided Tour

53

English

When Sound Module mode is set to "TG300B"

Normal Voices

BankSelect MSB

BankSelect LSB

0~41

126, 127

BankSelect MSB

BankSelect LSB

GM Voice set and variation set of Voices

C/M Voices*

Drum Voices

Drum Kits

*

The C/M Voice set is included to provide multi-timbral compatibility for
computer music systems and song data that predate the GM System Level 1
standard.

Part Mode

The Part mode is used to determine whether the selected Part uses Normal
Voices or Drum Voices.  It also lets you select a particular drum setup for
editing the Drum Voice.  This is done in the Multi Part Edit mode (page
120).

Normal mode and Drum mode

The Part mode features two settings: Normal mode and Drum mode.
In the Normal mode (“normal”), Normal Voices can be selected.
In the Drum mode (“drum,” “drumS1 - S4”), Drum Voices can be selected.

NOTES
• When the Sound Module mode is set to “PFM,” the Part mode is fixed to normal

and cannot be changed.  (The Part Mode parameter is not displayed.)

• When using the Voice Category buttons to select Drum and Normal Voices, the

Part mode is automatically changed to the appropriate mode.  Pressing one of the
Voice Category buttons [Piano] - [Model excl.] automatically sets the Part mode
to Normal, and pressing the [Drum] button automatically sets the Part mode to
Drum (“drum,” “drumS1 - S4”).

About Drum Setups

The Drum Voice cannot be edited directly on the MU128.  First, assign one
of the drum setups to a Part, then edit the selected setup.  Editing of drum
setups is done in the Multi Part Edit mode (page 126).

The MU128 has four internal drum setups (“drumS1 - S4”), and each can

be assigned to different Parts and have different settings for the drum sounds.
However, if the same drum setup is selected simultaneously for more than
one Part, editing the drum setup in one Part will automatically change all the
other Parts to which the same drum setup is assigned.

By setting the Part mode to “drum” for more than one Part, you can have

different Drum Voices assigned to each of these Parts.  However, the Drum
Voices for Parts set to “drum” cannot be edited.

About the Parts and Voices of the MU128

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

RGBlink UMS4 plus User Manual preview
UMS4 plus
Brand: RGBlink Pages: 42
Trycom Technology TRP-C08H User Manual preview
TRP-C08H
Brand: Trycom Technology Pages: 20
CYP AU-11SA-4K22 Operation Manual preview
AU-11SA-4K22
Brand: CYP Pages: 9
Oilon ECO Inverter+ 7 Installation And Commissioning Manual preview
ECO Inverter+ 7
Brand: Oilon Pages: 58
Kipor SINEMASTER IG4300 Owner'S Manual preview
SINEMASTER IG4300
Brand: Kipor Pages: 50
Pentax EPK-1000 Owner'S Manual preview
EPK-1000
Brand: Pentax Pages: 44
Maurer HT-E-1500-12 Manual preview
HT-E-1500-12
Brand: Maurer Pages: 2
tams elektronik LD-G-10 Manual preview
LD-G-10
Brand: tams elektronik Pages: 28
Channel Master CM-7004 Quick Start Manual preview
CM-7004
Brand: Channel Master Pages: 48
Sabrent TV-PC85 User Manual preview
TV-PC85
Brand: Sabrent Pages: 7
Mastervolt WHISPER 3 Installation Manual preview
WHISPER 3
Brand: Mastervolt Pages: 28
Vector MAXX SST VEC051D Owner'S Manual & Warranty Information preview
MAXX SST VEC051D
Brand: Vector Pages: 44
Larco Sonic Guard Installation And Operation Manual preview
Sonic Guard
Brand: Larco Pages: 11
M-system M8AP Instruction Manual preview
M8AP
Brand: M-system Pages: 2
Audio Note DAC Kit 3.1 Instruction Manual preview
DAC Kit 3.1
Brand: Audio Note Pages: 79
Axis Q7436 User Manual preview
Q7436
Brand: Axis Pages: 64
Vanner VC-30 Owner'S Manual preview
VC-30
Brand: Vanner Pages: 6
GE GEP10-3-AU10 User Manual preview
GEP10-3-AU10
Brand: GE Pages: 55

Brands by name

Popular brands

Load more brands