manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

4

MU128

Welcome to the MU128

Welcome to the MU128

Congratulations and thank you for purchasing the Yamaha MU128 Tone
Generator!

The MU128 is an advanced tone generator providing an amazing total of
1342 high-quality Voices, full General MIDI compatibility — including
Yamaha’s XG — plus flexible computer interfacing in a compact, easy-
to-use half-rack mount unit.

With the convenient built-in host computer interface and MIDI termi-
nals, the MU128 is ideal for any computer music system — from connec-
tion to a simple laptop to integration in a complete MIDI studio.  With its
large LCD and the intuitive graphic controls on the display, the MU128 is
remarkably easy to use.

The MU128 also features completely independent dual MIDI inputs, 64
Part multi-timbral capacity and full 128-note polyphony for playback
of even the most sophisticated song data.  A special Performance mode
gives you flexible four-Voice operation, for live performance applications.
Also built into the system are five digital multi-effects and two EQ sec-
tions (one per-part, and one overall), which give you enormous versatility
in “sweetening” the sound.  What’s more, the MU128 provides a host of
comprehensive, yet easy-to-use editing tools for getting just the sound you
need.

The MU128 is also compatible with the powerful XG Plug-in System,
allowing you to install up to three optional XG Plug-in boards for
additional Voices and effects.  Currently available plug-in boards include
the:

PLG100-VL Virtual Acoustic — which provides stunning monophonic

synthesizer Voices with the powerful physical modeling tone generation
system.

PLG100-VH Vocal Harmony — which produces automatic

“harmonizer” effects, letting you apply one-, two- or three-part harmonies
to a vocal signal (via a microphone connected to the A/D Inputs).

PLG100-DX Advanced DX/TX — which provides vintage FM

synthesis Voices, the same as found on the famous Yamaha DX7.
Three boards (in any combination) can be installed simultaneously.  With
the easy-to-remove rear panel cover and the special guide slots, installation
is also exceptionally simple.

The MU128 also has convenient A/D inputs that allow you to connect a
microphone, electric guitar or other instrument, and mix those signals with

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

Harmonic Electra 9200 Getting Started Manual preview
Electra 9200
Brand: Harmonic Pages: 27
Unipower SLI 15 User Manual preview
SLI 15
Brand: Unipower Pages: 19
Zena 150 series Manual preview
150 series
Brand: Zena Pages: 12
Honda EU22i Owner'S Manual preview
EU22i
Brand: Honda Pages: 74
MrCool U-match MDUI18024 Service Manual preview
U-match MDUI18024
Brand: MrCool Pages: 120
Generac Power Systems 1.6L 18 kW Owner'S Manual preview
1.6L 18 kW
Brand: Generac Power Systems Pages: 64
Trace Engineering SW II Datasheet preview
SW II
Brand: Trace Engineering Pages: 2
Control Techniques Unidrive M200 Quick Start Manual preview
Unidrive M200
Brand: Control Techniques Pages: 56
Orbis ATC-820 User Manual preview
ATC-820
Brand: Orbis Pages: 2
T-TeleSec LineCrypt DSL User Manual preview
LineCrypt DSL
Brand: T-TeleSec Pages: 21
MAGIRA ASKIS PSI-6 Assembly And Operating Instructions Manual preview
ASKIS PSI-6
Brand: MAGIRA Pages: 58
Xnexus NXS 150 Operating Manual preview
NXS 150
Brand: Xnexus Pages: 20
B PLUS TV ELZapp User Manual preview
ELZapp
Brand: B PLUS TV Pages: 10
Eaton DA1-34072FB-B20C Original Operating Instructions preview
DA1-34072FB-B20C
Brand: Eaton Pages: 16
Analog Devices LTC7810ELXE Demo Manual preview
LTC7810ELXE
Brand: Analog Devices Pages: 10
IVIEW 1000STB User Manual preview
1000STB
Brand: IVIEW Pages: 40
Mitsubishi AJ65BT-64AD User Manual preview
AJ65BT-64AD
Brand: Mitsubishi Pages: 2
Xantrex XPower 500 Owner'S Manual preview
XPower 500
Brand: Xantrex Pages: 36

Brands by name

Popular brands

Load more brands