Yamaha MU100R, Owner'S Manual, Page: 94 / 200

Guided Tour
83
Individual Outputs
This convenient feature allows you to send the output of a selected Part or
Parts to the INDIV. OUTPUT jacks. For Drum Parts, you can even select
specific drum sounds to be output through these jacks.
In general, the extensive built-in effects and other Part controls of the
MU100R provide all you need for processing and mixing complex multi-
Part songs. However, there may be times (in studio recording, for instance)
when you want to “sweeten” or process a certain Voice or sound with a favor-
ite outboard effect unit, or record a Part to a separate track of a tape recorder.
The individual outputs are designed just for these kinds of applications.
In this section, you’ll learn how to:
©
Set up the MU100R so that two Parts are independently routed to the
two INDIV. OUTPUT jacks.
Using the Individual Outputs
Operation
1
Make the necessary audio connections.
In the example illustration below, the INDIV. OUTPUT 1 jack is
connected to the input of an effect unit. The output of the effect
unit is then connected to a channel on a mixing console, along
with the main OUTPUT jacks of the MU100R.
In a variation of this, INDIV. OUTPUT 1 could be connected di-
rectly to a separate input channel on the mixing console, then proc-
essed with an outboard effect using the send/return connections on
the mixer.
Hint
If you don’t have an external mixer yet want to use the individual output and an
external effect to process a Part, you can do so and return the output from the
effect device back into the MU100R via one of the A/D inputs. (For information on
using the A/D inputs, see page 87.)
Individual Outputs
Effect unit MU100R
Mixing Console
(3) INDIV. OUTPUT
(4) OUTPUT L and R (2) In (1) Out