manualshive.com logo in svg

Yamaha MU100R, Owner'S Manual, Page: 47 / 200

Share
Download
Yamaha MU100R Owner'S Manual Download Page 47

36

Guided Tour

Edit Menu Parameters

The Edit menu parameters provide more detailed and advanced controls over
the Parts. These are powerful tools that let you subtly enhance or fine-tune
the sound of a Voice — or radically change its character for some wild and
unique sounds.

Changing the Filter and EG Settings of a Part

Operation

1

Select the desired Part.
Use the [PART 

-

/

+

] buttons. Also, for the sake of these in-

structions, select the “SquareLd” Voice, #081. (See page 27.)

2

Call up the Edit menu.
Press the [EDIT] button.

3

Select “FILTER” in the display.
Use the [SELECT 

<

/

>

] buttons. The Edit menu has five items:

FILTER, EG (Envelope Generator), EQ (Equalizer), VIBRATO, and
OTHERS. The “flag” next to the item flashes when selected.

Details
• When a drum Part is selected, the EQ menu item is replaced by “DRUM.” (See

page 114 for information on editing drum Parts.)

• When a VL Voice Part is selected, the “PLUGIN” menu item also appears in the

display.

4

Call up the Filter parameters.
Press the [ENTER] button.

Editing in the Multi Mode

Summary of Contents for MU100R









































































































































































































Reviews:

No comments