manualshive.com logo in svg

Yamaha MU100R, Owner'S Manual, Page: 26 / 200

Share
Download
Yamaha MU100R Owner'S Manual Download Page 26

Guided Tour

15

Playing the Demo Song

Now that you’ve set everything up properly, try playing the built-in Demo
song. This showcases the high-quality Voices and the AWM2 tone genera-
tion system of the MU100R. It also is an excellent demonstration of the 32-
part multi-timbral capacity and the various expressive controls and effects
that can be used simultaneously. Most importantly, the Demo song will give
you an idea of how powerful the MU100R can be in your own MIDI/com-
puter music setup.

Operation

1

Press the [UTIL] button.

2

Select and open the DEMO menu.
Use the [SELECT 

-

/

>

] buttons to select “DEMO” (the menu

icon flashes), then press the [ENTER] button.

3

Start the Demo song.
Press the [ENTER] button. The Demo Song starts playing imme-
diately and repeats indefinitely until stopped (in step 4 below).
Playback of the individual Parts of the song is shown graphically
by the “level meter” bars in the display.

NOTE
During Demo Song playback, none of the panel controls (with the exception of
the [EXIT] button and the VOLUME control) can be used.

Playing the Demo Song

Summary of Contents for MU100R









































































































































































































Reviews:

No comments