manualshive.com logo in svg

Yamaha MU100R, Owner'S Manual, Page: 146 / 200

Share
Download
Yamaha MU100R Owner'S Manual Download Page 146

Performance Mode

135

■

Filter

Path:[EDIT] button 

→

 “PART” 

→

“FILTER” (“FIL” when a VL Part
is selected)

The Filter section of Performance Edit parameters are the same as the
corresponding parameters in the Multi Edit mode. (See page 100.)

■

EG

Path:[EDIT] 

→

 “PART” 

→

 “EG”

The EG section of Performance Edit parameters are the same as the cor-
responding parameters in the Multi Edit mode. (See page 102.)

■

EQ

Path:[EDIT] 

→

 “PART” 

→

 “EQ”

The EQ Performance Edit parameters are the same as the corresponding
parameters in the Multi Edit mode (See page 105).

■

Vibrato

Path:[EDIT] button 

→

 “PART” 

→

“VIBRATO” (“VIB” when VL
Part is selected)

The Vibrato Performance Edit parameters are the same as the correspond-
ing parameters in the Multi Edit mode. (See page 106.)

■

Others

Path:[EDIT] button 

→

 “PART” 

→

 “OTHERS”

The Others Performance Edit parameters contains miscellaneous con-
trols, including those related to tuning, velocity, note range, etc. With a
few omitted parameters, these are the same as the parameters in the Multi
Edit mode.

NOTE
The Part Edit parameter (available in Multi Edit) is not available in Performance
Edit mode. No Drum Parts can be selected for a Performance.

Performance Edit Mode

Summary of Contents for MU100R









































































































































































































Reviews:

No comments