manualshive.com logo in svg

Yamaha MU100R, Owner'S Manual, Page: 140 / 200

Share
Download
Yamaha MU100R Owner'S Manual Download Page 140

Performance Mode

129

Chorus Return (ChoRtn)

Range:

000 — 127

This determines the amount of Chorus re-
turn for the Performance in the overall mix.

Variation Return (VarRtn)

Range:

000 — 127

This determines the amount of Variation
return in the overall mix of the Perfor-
mance. Variation Return is only available
when the Variation Connection param-
eter is set to SYS. (See page 145.)

System Transpose (SysTran)

Range:

–24 — +24 semitones

This determines the overall Transpose
setting of the Performance.

Performance Part Control

Single Part

For basic information on using the Single Part controls in the Performance mode, see
page 46.

Bank Number

Settings:

A1 part: 000 — 003, 018, 019
A2 part: 000 — 003
1 — 4 part:

XG Voice banks,
MU100 Exclusive Voice banks,
VL Voice banks

This determines the bank number of the
selected Part’s Voice. Each bank contains
128 Voices. (Refer to the SOUND LIST
& MIDI DATA booklet.)

Program (Voice) Number

Range:

001 — 100

This determines the Voice for the selected
Part. (Refer to the SOUND LIST &
MIDI DATA booklet.)

Summary of Contents for MU100R









































































































































































































Reviews:

No comments