manualshive.com logo in svg

Yamaha MU100R, Owner'S Manual, Page: 139 / 200

Share
Download
Yamaha MU100R Owner'S Manual Download Page 139

128

Performance Mode

System MIDI Channel (Sys CH)

Settings:

01 — 16

This determines the MIDI receive chan-
nel for all Parts of the Performance.

Performance Bank

Settings:

Pre (Preset), Int (Internal)

This determines the bank of Performance
programs: Preset or Internal. Preset Perfor-
mances are those that have been created and
loaded at the factory; the Internal bank is
reserved for user-created Performances.

NOTE
When changing Performance banks, there may
be a slight delay before the sound changes.

Performance Number

Range:

001 — 100

This determines the Performance number.

NOTE
When changing Performance numbers, there
may be a slight delay before the sound changes.

Performance Part Control

All Part

For basic information on using the All Part controls in the Performance mode, see page
44.

Performance Volume (Pfm Vol)

Range:

000 — 127

This determines the overall Volume of the
Performance.

Performance Pan (Pfm Pan)

Range:

L63 — C — R63

This determines the overall Pan position
of the Performance.

Reverb Return (RevRtn)

Range:

000 — 127

This determines the amount of Reverb
return for the Performance in the overall
mix.

Performance Part Control

Summary of Contents for MU100R









































































































































































































Reviews:

No comments