Yamaha MU100R, Owner'S Manual, Page: 57 / 200

46
Guided Tour
Single Part Controls — Selecting Different
Voices for the Performance
In this next section, you’ll use the Single Part controls to change the Voice
settings of the Performance.
Operation
1
Call up the Single Part controls.
Simultaneously press both [PART
-
/
+
] buttons.
PART MIDI BANK/PGM# VOL EXP PAN REV CHO VAR KEY
For more information on the Single Part controls, see page 129.
2
Select the desired Part.
Use the [PART
-
/
+
] buttons.
Keep in mind that you should select only from the active Parts —
the ones with a dark bar in the display. Other Parts can be selected
and changed; however, they will not sound in the Performance.
3
Select the desired bank and Voice.
Do this in the same way as you did in the Multi mode. (See steps
#2 and #3 on page 28.)
Performance name, bank (Preset or Internal), and
program number.
Note Shift
(key transpose
setting for
selected Part).
Reverb Send.
Variation Send.
Part Pan
(stereo position of selected Part).
Expression
(not available; always set to maximum).
(Not available in Single Part.)
Part Volume.
Selected Part number. (Change this with the [PART
-
/
+
] buttons.)
Chorus Send.
Indicates active Part(s) of the
Performance.
Editing in the Performance Mode