Instrument an
d
control functions
4-11
4
3. Turn the main switch to “ON” and
continue holding button B for 5
seconds until the display switches
to the brightness control mode.
4. Use the “INFO” switch/button A to
set the brightness level.
5. Push the “TRIP” switch/button B
to confirm the selected brightness
level and exit the brightness con-
trol mode.
TIP
The “TRIP” switch cannot be used to
enter the brightness control mode.
EAU1234S
Han
d
le
b
ar switches
Left
Ri
g
ht
EAU12352
Pass switch “
”
Press this switch to flash the headlight.
TIP
When the dimmer switch is set
to “
”, the passing switch has no ef-
fect.
EAU12402
Dimmer switch “
/
”
Set this switch to “
” for the high
beam and to “
” for the low beam.
1. Pass switch “
”
2. “TRIP/INFO” switch
3. Dimmer switch “
/
”
4. Turn signal switch “
/
”
5. Horn switch “
”
1
2
3
4
5
1
2
3
4
5
1. Stop/Run/Start switch “
/
/
”
2. Hazard switch “OFF/
”
11
1
2
2
UBEEEYE0.book Page 11 Wednesday, December 1, 2021 8:41 AM
