Instrument an
d
control functions
4-18
4
EAU83140
Seat
To remove the seat
Insert the key into the seat lock, turn it
counterclockwise, and then pull the
seat off.
To install the seat
Fit the slot in the seat onto the projec-
tion as shown, orient the seat in order
to insert the seat bracket into the seat
lock, push the rear of the seat down to
lock it in place, and then remove the
key.
TIP
Make sure that the seat is properly se-
cured before riding.
EAU47003
A
d
justin
g
the shock a
b
sor
b
er
assem
b
ly
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
NOTICE
ECA10102
To avoi
d
d
ama
g
in
g
the mechanism,
d
o not attempt to turn
b
eyon
d
the
maximum or minimum settin
g
s.
Adjust the spring preload as follows.
Turn the adjusting ring in direction (a)
to increase the spring preload.
Turn the adjusting ring in direction (b)
to decrease the spring preload.
Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.
Use the special wrench and ex-
tension bar included in the tool kit
to make the adjustment.
1. Seat lock
2. Unlock.
11
1
22
1. Slot
2. Projection
3. Seat bracket
4. Seat lock
3
3
4
4
1
1
2
2
UBEE20E0.book Page 18 Friday, October 29, 2021 9:28 AM
