MONITOR LEVEL CONTROLS
When setting the PHONES SELECT Switch to the
MONITOR position, these level controls are used for each
track to achieve a level balance for easy monitoring. Use
these controls freely and independently to maintain a
desired level balance during overdubbing operations,
when the addition of a new signal changes the volume.
PHONES CONTROL
This control adjusts the volume of the headphones (See
page 10).
CONNECTOR SECTION
FRONT PANEL
INPUT JACKS
The MT2X mixer has six channels and therefore six IN-
PUT jacks. INPUT 1 and 2 can be used with microphones
or line-level sources such as electric and electronic
instruments. INPUT
S
3 through 6 accept only line-level
input.
Plug a set of headphones into this jack for monitoring.
PHONES JACK
Please use headphones rated from 8–40 ohms for best
results.
PUNCH IN/OUT JACK
When directly connecting an electric guitar to one of
the MT2X INPUTs, we recommend the use of a guitar
preamplifier or “direct box” between the guitar and
MT2X to ensure optimum sound quality.
REAR PANEL
By connecting the optional FS-1 footswitch to this jack,
you can control punch-in/punch-out operations by foot.
12
