background image

Perio

d

ic maintenance an

d

 a

d

justment

8-27

8

EAUM1653

Lu

b

ricatin

g

 the swin

g

arm piv-

ots

The swingarm pivots must be lubricat-
ed by a Yamaha dealer at the intervals
specified in the periodic maintenance
and lubrication chart.

EAU23273

Checkin

g

 the front fork

The condition and operation of the
front fork must be checked as follows
at the intervals specified in the periodic
maintenance and lubrication chart.

To check the con

d

ition

Check the inner tubes for scratches,
damage and excessive oil leakage.

To check the operation

1. Place the vehicle on a level sur-

face and hold it in an upright posi-
tion. 

WARNING! To avoi

d

 injury,

securely support the vehicle so
there is no 

d

an

g

er of it fallin

g

over.

 [EWA10752]

2. While applying the front brake,

push down hard on the handle-
bars several times to check if the
front fork compresses and re-
bounds smoothly.

NOTICE

ECA10591

If any 

d

ama

g

e is foun

d

 or the front

fork 

d

oes not operate smoothly,

have a Yamaha 

d

ealer check or re-

pair it.

Recommen

d

e

d

 lu

b

ricant:

Lithium-soap-based grease

UBAM11E0.book  Page 27  Wednesday, September 8, 2021  1:00 PM

Summary of Contents for MT09SPN

























































































































Reviews: