Instrument an
d
control functions
5-24
5
EAU46833
Han
d
le
b
ar position
The handlebar can be adjusted to one
of two positions to suit the rider’s pref-
erence. Have a Yamaha dealer adjust
the position of the handlebar.
EAU76345
A
d
justin
g
the front fork
WARNING
EWA14671
Always a
d
just the sprin
g
preloa
d
on
b
oth fork le
g
s equally, otherwise
poor han
d
lin
g
an
d
loss of sta
b
ility
may result.
Each front fork leg is equipped with a
spring preload adjusting bolt, the right
front fork leg is equipped with a re-
bound damping force adjusting screw
and the left front fork leg with a com-
pression damping force adjusting
screw.
NOTICE
ECA10102
To avoi
d
d
ama
g
in
g
the mechanism,
d
o not attempt to turn
b
eyon
d
the
maximum or minimum settin
g
s.
Sprin
g
preloa
d
Turn the adjusting bolt in direction (a)
to increase the spring preload.
Turn the adjusting bolt in direction (b)
to decrease the spring preload.
The spring preload setting is deter-
mined by measuring distance A,
shown in the illustration. The shorter
distance A is, the higher the spring pre-
load; the longer distance A is, the lower
the spring preload.
1. Handlebar
1
1. Spring preload adjusting bolt
1. Distance A
(b)
1
1
1
(a)
(b)
(a)
1
UB7N10E0.book Page 24 Wednesday, October 14, 2020 10:14 AM
